Replacing Your Battery

1. Visually inspect the battery connections and note the location of the positive (+) and negative (-) terminals. 
2. Disconnect the negative (-) cable from the battery with a wrench. 
3. Disconnect the positive (+) cable. 
4. Remove the hold-down clamp which holds the battery in place. 
5. Lift out the battery. 
6. Inspect the battery tray for corrosion or damage. Clean or replace the tray and attaching parts as needed. 
7. Inspect the battery cables for damage. Clean or replace the cables as needed to ensure a good connection. 
8. Install your new battery and secure it with the hold-down. Be sure the new battery is the same voltage and group size as your original equipment battery. Check to ensure that it has at least the same cold-cranking amp (CCA) and reserve capacity (RC) ratings as specified by the original equipment manufacturer. 
9. Attach the positive (+) cable to the positive (+) terminal. 
10. Attach the negative (-) cable to the negative (-) terminal. Be careful not to over tighten.

Dixie Battery is more than willing to install your battery free of charge.  Also be aware on some vehicles, an anti-theft feature of many radio systems causes them to go into locked mode when power is lost.  You may have to contact the vehicle manufacture to get the radio unlocked.